Warning!

This software update can be used only with the xTAB-100dci 3G device (don't use it with other devices). Update can be done for the customer's own risk. Improperly done update can harm your device and may make it unusable. We can't take responsibility for the harms and damages if the update hasn't been done properly. Repair of a device caused by an improperly done update is not under warranty. 

 

Applying this software update will cause the erasure of installed applications, settings, documents, photos, etc.. Please create a backup of your important data before the update procedure. The software update contains the following changes:

  • Fixed: display and visualization problems

Throughout the update procedure, don't turn off the device and don't disconnect the USB cable. The update procedure will be finished after you see the user interface of the Android operating system.

To apply the update, please follow the required steps below:

  1. Download and extract the wayteq_xtab_100dci_3G_v3.zip file (MD5 hash: 7b98fce911c2484a51157c7aec7e5014). You will see three folders: "driver", "image" and "tool". The image folder contains the firmware image, the tool folder contains the firmware updater application and the driver folder containes the required driver.
  2. Charge the battery fully. Do not connect the AC charger to the Tablet PC while updating, because updating won't work if charger is connected.
  3. Installing the driver:
    Turn off the Tablet PC. Press and hold down the Volume – button. While holding down the button, connect the device to your PC with the USB cable. If the driver isn't already installed, the window of the driver wizard will pop up.
    1. Choose the "Browse my computer for driver software" menu item.
    2. Select "Include subfolders" and then the "Browse" button to select the folder containing the driver (rockusb.sys) file. (Example: “Download location”\driver – Select the folder of your computer's architecture).
    3. The PC will install the driver. After the successful installation, click on the Finish button.
  4. Using the firmware updater application:
    After you've downloaded and extracted the .zip file, start the tool/RKBatchTool.exe application.
  5. The firmware update process:
    1. Turn off the device. Press and hold down the "Volume -" button and then connect the device to the PC with the USB cable.
    2. You will see a number with a green square background at the "Connected Devices" part in the firmware updater application.
    3. Browse for the downloaded firmware image (image/wayteq_100dci_20130708.img).
    4. Start the firmware update procedure with clicking on the Upgrade button.
    5. This update will take some minutes. Meanwhile don't use the Tablet PC or your computer.
    6. After a successful update, you will see the "**********Upgrade Done Success<1> Fail<0>**********" message.
    7. After that, you can close the firmware updater application. The Tablet PC will reboot automatically and you will see the user interface of the Android operating system.